'----------------------------------------------------------------
'SHOPBOT ROUTER FILE IN MM
'GENERATED BY PARTWorks
'Minimum extent in X = 0.000 Minimum extent in Y = 0.000 Minimum extent in Z = -19.200
'Maximum extent in X = 2438.000 Maximum extent in Y = 1220.000 Maximum extent in Z = 0.000
'Length of material in X = 2438.000
'Length of material in Y = 1220.000
'Depth of material in Z = 19.200
'Home Position Information = Bottom Left Corner, Material Surface 
'Home X = 0.000000 Home Y = 0.000000 Home Z = 20.000000
'Rapid clearance gap or Safe Z = 6.000
'UNITS:MM
'
IF %(25)=0 THEN GOTO UNIT_ERROR	'check to see software is set to standard
SA                             	'Set program to absolute coordinate mode
CN, 90
'New Path
'Toolpath Name = Drill 1
'Tool Name   = Fab End Mill (6 mm) single flute

&PWSafeZ = 6.000
&PWZorigin = Material Surface
&PWMaterial = 19.200
'&ToolName = "Fab End Mill (6 mm) single flute"
&Tool =1                    'Jog Z axis to safe height
C9
TR,12000
C6                   'Return tool to home in x and y
PAUSE 2
'
MS,16.6,19.9
JZ,20.000000
J2,0.000000,0.000000
J3,25.402000,29.388000,6.000000
M3,25.402000,29.388000,-4.000000
J3,25.402000,29.388000,6.000000
J3,29.969000,440.408997,6.000000
M3,29.969000,440.408997,-4.000000
J3,29.969000,440.408997,6.000000
J3,25.402000,885.682007,6.000000
M3,25.402000,885.682007,-4.000000
J3,25.402000,885.682007,6.000000
J3,29.969000,1196.232056,6.000000
M3,29.969000,1196.232056,-4.000000
J3,29.969000,1196.232056,6.000000
J3,667.052002,1193.947998,6.000000
M3,667.052002,1193.947998,-4.000000
J3,667.052002,1193.947998,6.000000
J3,1511.928955,1193.947998,6.000000
M3,1511.928955,1193.947998,-4.000000
J3,1511.928955,1193.947998,6.000000
J3,1406.890015,655.054016,6.000000
M3,1406.890015,655.054016,-4.000000
J3,1406.890015,655.054016,6.000000
J3,1470.827026,17.971001,6.000000
M3,1470.827026,17.971001,-4.000000
J3,1470.827026,17.971001,6.000000
J3,1016.419983,22.538000,6.000000
M3,1016.419983,22.538000,-4.000000
J3,1016.419983,22.538000,6.000000
J3,546.028992,17.971001,6.000000
M3,546.028992,17.971001,-4.000000
J3,546.028992,17.971001,6.000000
J3,2416.176025,27.104000,6.000000
M3,2416.176025,27.104000,-4.000000
J3,2416.176025,27.104000,6.000000
J3,2393.341064,1187.098022,6.000000
M3,2393.341064,1187.098022,-4.000000
J3,2393.341064,1187.098022,6.000000
JZ,20.000000
J2,0.000000,0.000000
'
'Turning router OFF
C7
END
'
'
UNIT_ERROR:
CN, 91                            'Run file explaining unit error
END